About

In developing the product priority has been given to high reliability and robustness.

The borehole water level sensors can cope with a water level range of up to 200 m which is perfect for those deep production boreholes! The sensors must be installed with a 32 mm ID observation pipe (ideally Class 10). The web interface allows capture of manual water measurements to ensure correct calibration of the water level measurements. Both manual and logger readings are graphed.

The GeoTel controller requires a 220V (15 Amp) power supply and can be fitted with an optional battery, should power failure occur. If 220V power is not available solar panels or other power sources can be used. The GeoTel controller can be installed in a secure borehole building/enclosure.

The data on the web interface is uploaded as soon as readings have been taken. In the event that a connection cannot be established the data will be uploaded as soon as a connection can be established. For flow meters, however, a reading is taken at pre-set intervals which can be varied, i.e. one reading every 1 litre, 10 litres or 100 litres. These settings are site specific and are set according to the application and requirements.

The price varies per application.

For more information please contact us.